Schedule Service

Appliance Repair Services

we are

Appliance GrandMasters

Samsung Dryer Error Codes: A 2025 Comprehensive Guide

Is your Samsung dryer flashing unfamiliar codes and halting your laundry routine?

Understanding Samsung dryer error codes is essential to keeping your appliance in peak condition. Below, we’ve compiled a list of common codes, their meanings, and suggested troubleshooting steps.

If problems persist—or if you’re unsure how to proceed—Appliance GrandMasters is here with professional samsung dryer repair and dryer maintenance services.

In case you missed it...

Error Codes Guide

samsung dryer gas control panel

Voltage Errors

Codes: 9C1, 9E, 2E, 9E1
Meaning: The dryer is detecting an abnormal voltage supply.

Possible Causes & Solutions:

  1. Dedicated Circuit: Ensure the dryer is on its own circuit and not using an extension cord.
  2. Proper Voltage Supply: Double-check the power cord installation and confirm the voltage matches Samsung’s specifications.
  3. Power Grid Differences: If you’re using the dryer outside the country of purchase, local power grid variations can trigger these errors.
  4. Next Steps: If the problem persists, contact Appliance GrandMasters for professional appliance repair to resolve voltage-related issues.

 

Jammed Button Errors

Codes: bE, bE2, bC2, 6E, 6E2, 6C2
Meaning: At least one control panel button is stuck or being registered as constantly pressed.

Possible Causes & Solutions:

  1. Check Buttons: Turn the dryer off, then press each button individually to release any that may be stuck.
  2. Assess Damage: Look for cracked or damaged control buttons.
  3. Next Steps: If the error persists, call Appliance GrandMasters for expert dryer repair or button replacement.

Temperature Errors

Codes: tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, 1tCS
Meaning: Errors involving the dryer’s temperature or its sensing components.

Possible Causes & Solutions:

  1. Clean the Lint Screen: A clogged lint filter can alter temperature control.
  2. Check Vent System: Blockages in the vent or duct hamper airflow, leading to temperature irregularities.
  3. Next Steps: If errors persist despite cleaning, let Appliance GrandMasters handle the samsung dryer repair to prevent further damage.

Appliance GrandMasters is your go-to appliance repair shop!

Our certified and factory-trained technicians are equipped to handle repairs on all major brands, ensuring quality, long-lasting solutions.

Call us Now
Schedule Online
Facebook Instagram

Follow Us on our Official Social Media Channels

Heating Errors

Codes: HC, hE, HC4, 1 HC
Meaning: The dryer is overheating or detecting irregular heat levels.

Possible Causes & Solutions:

  1. Remove Lint Buildup: Clear the lint screen and vent system for unobstructed airflow.
  2. Check Voltage (Electric Dryers): Overheating can stem from incorrect voltage supply—consult an electrician if you suspect wiring problems.
  3. Next Steps: If the overheating issue continues, enlist the help of Appliance GrandMasters for professional dryer repair.

Communication Errors

Codes: AC, Et, AE, EEE, AE4, AE3, AE5, E3, 1 AC
Meaning: Internal components within the dryer aren’t communicating properly.

Possible Causes & Solutions:

  1. Power Cycle: Turn the dryer off, wait a minute, and power it back on.
  2. Next Steps: If restarts don’t help, call Appliance GrandMasters for an in-depth inspection and potential part replacement.

Communication Errors

Codes: AC, Et, AE, EEE, AE4, AE3, AE5, E3, 1 AC
Meaning: Internal components within the dryer aren’t communicating properly.

Possible Causes & Solutions:

  1. Power Cycle: Turn the dryer off, wait a minute, and power it back on.
  2. Next Steps: If restarts don’t help, call Appliance GrandMasters for an in-depth inspection and potential part replacement.

Frequency Errors

Codes: FC, FE, 1 FC
Meaning: The dryer is detecting an invalid or inconsistent power frequency.

Possible Causes & Solutions:

  1. Restart the Cycle: Minor frequency glitches can vanish after powering off and on.
  2. Next Steps: If errors recur, contact Appliance GrandMasters to ensure your dryer is compatible with the local power supply.

Vent Blockage Test Results

Codes: Clg, Cl9, Cg, C9, C80, C8o, C8, C90, C9o, Ct
Meaning: Vent blockage or suboptimal airflow readings.

  • Clg / Cg: Vent is clogged.
  • C80 / C8: Vent is 80% blocked.
  • C90 / C9: Vent is over 90% blocked.
  • C1 / CL1: Laundry items detected in the drum during testing.
  • Ct: Dryer temperature is too low or high for a proper test.


Possible Causes & Solutions:

  1. Clear Vent Blockages: Check ducts and vents for built-up lint or debris.
  2. Remove Laundry: If the code indicates items in the drum, run the test without clothes.
  3. Next Steps: Persistent vent-blockage alerts might require professional cleaning—Appliance GrandMasters can assist.

Download in Progress

Code: dn
Meaning: The dryer is downloading new firmware.

Possible Causes & Solutions:

  1. Do Not Unplug: Keep the dryer powered during the update process.
  2. Next Steps: If the code remains for over 24 hours, contact Appliance GrandMasters to examine the dryer’s firmware issues.

Other Errors

Codes: 3C, oD, 1 AC7, HC2, etc.
Meaning: Various sensor, component, or mechanical faults.

Possible Causes & Solutions:

  1. Power Cycle: Turn the dryer off, wait a few minutes, and then turn it on again.
  2. Check Manual: Some issues may have model-specific instructions.
  3. Next Steps: If the error code remains, count on Appliance GrandMasters for expert dryer repair and diagnostics.
samsung dryer set laundry room

FAQs

1. Can I still use my dryer if it shows an error code?

It depends on the code. Minor glitches (like vent blockages) might resolve with simple maintenance. However, for frequent or severe errors (voltage issues, overheating), discontinue use and seek dryer repair from Appliance GrandMasters.

2. How often should I clean the lint filter and vent system?

Clean the lint filter before every load to maintain airflow. For the vent, schedule routine checks—ideally every 6–12 months—to clear accumulated lint and debris.

3. Will resetting my dryer fix most error codes?

A power cycle can clear some temporary errors but doesn’t fix underlying issues like sensor malfunctions or blockages. If codes recur, a professional diagnosis may be necessary.

4. Can I perform Samsung dryer repair myself?

While basic maintenance (filter cleaning, vent checks) is straightforward, more complex tasks (button replacements, electrical checks) are best left to professional appliance repair services like Appliance GrandMasters.

5. Are these errors covered by warranty?

Warranty coverage varies by purchase date, model, and region. Check your dryer’s warranty terms or contact your retailer to verify. For in and out-of-warranty repairs, Appliance GrandMasters provides reliable service at fair rates.

samsung dryer top panel

Final Thoughts

Understanding Samsung dryer error codes is the first step toward effective dryer maintenance and timely appliance repair. While some troubleshooting steps are simple—like cleaning the lint screen or clearing the vent system—more complex issues often require professional assistance. Whenever an error keeps recurring or the problem seems beyond a quick fix, Appliance GrandMasters is ready to help with reliable samsung dryer repair.

Key Takeaways

  • Error codes highlight voltage, temperature, door, or component issues.
  • Basic tasks like vent cleaning, power cycling, and door latch checks can resolve many minor errors.
  • Professional service is recommended for persisting or unclear problems.

Expert Appliance Repairs

Don’t stress. Appliance GrandMasters provides professional appliance installation and repair services to keep your appliances in top condition. Let our skilled technicians handle the work, ensuring your appliances run smoothly and efficiently. Contact us today for all your appliance repair needs in Greenville.

Get professional home appliance Repairs, maintenance & Installation now!

No worries! We’ve got you covered.
At Appliance GrandMasters, we’ve got your back. Let the experts handle it, so you can enjoy the convenience of smoothly running appliances without the DIY stress.

Call us Now
Schedule Online
Aquire a Maintenance Plan

Our Appliance Repair & Maintenance Service Area

Greenville, Greer, Taylors, Simsponville, Mauldin, Easley, Pickes, Liberty, Pelzer, Williamston, Spartanburg, Honea Path, Belton, Piedmont, Travelers Rest, Wellford, Fountain Inn, Moore, Reidville, Duncan, Lyman, Boiling Springs, Inman, Campobello, Landrum

About Appliance GrandMasters

agm rebranding

Formerly known as Mr. Rogers Appliances, we rebranded our appliance repair company to Appliance GrandMasters in June 2020. Since then, we have focused on developing our brand to be customer-oriented. 

Fixing appliances has become a passion for us. We enjoy challenges and we are always studying to become the very best.

We accomplish swift and top-notch service by employing efficient and friendly customer service procedures that guarantee accurate answers and solutions. 

Our approach involves the careful selection and comprehensive training for the necessary skills to fulfill our customers’ needs. Through these strategies, we strive to consistently provide exceptional service.