Appliance Repair Services
Menu
Many homeowners face similar challenges. In this article, we’ll address some of the most frequent questions about common problems with washing machines.
Each section will provide an explanation of the three most frequent causes, a DIY tip, and advice on when to call an expert appliance repair technician.
Don’t deal with the hassle. Call the appliance repair experts now.
These DIY tips are provided for general guidance. Appliance owners must always take necessary safety precautions and follow the user’s manual before attempting any repairs or troubleshooting. For more complex issues, professional assistance is recommended.
When your washing machine won’t spin, it can be frustrating. Below are the three most frequent causes:
Unbalanced Load: If the load inside the washer is uneven, the machine might not spin properly. This can happen with heavy items like blankets.
Malfunctioning Lid Switch: The lid switch acts as a safety mechanism, preventing the washer from spinning when the lid is open. If the lid switch is faulty, the washer might not spin.
Worn Drive Belt: This belt links the motor to the drum. When the drive belt is worn out or damaged, the drum won’t rotate.
DIY Tip: Try redistributing the load inside the washer to see if that solves the issue. If not, inspect the lid switch and drive belt for any visible damage.
When to Call an Expert: If the problem persists after trying these fixes, it’s time to call an appliance repair technician for a professional diagnosis.
A washing machine that won’t drain can leave you with a soggy mess. Below are the three most frequent causes:
Clogged Drain Hose: Debris or small items can get stuck in the drain hose, preventing water from draining.
Malfunctioning Drain Pump: The drain pump’s role is to remove water from the washer. If the pump isn’t working properly, water will remain in the machine.
Blocked Filter: Some washing machines have a filter that can become clogged with lint, dirt, or small objects.
DIY Tip: Check the drain hose for blockages and clear any debris. Also, clean the filter if your machine has one.
When to Call an Expert: If the machine still doesn’t drain, it could be a problem with the drain pump or a more complex issue that requires professional repair.
A loud washing machine can be annoying and concerning. Below are the three most frequent causes:
Worn Drum Bearings: The drum bearings support the drum as it spins. If they’re worn, they can create a loud rumbling noise.
Foreign Objects: Items like coins, buttons, or other small objects can become trapped in the drum or pump, leading to noise.
Imbalanced Load: An uneven load can cause the machine to make banging or thumping noises as the drum tries to spin.
DIY Tip: Check the drum for any foreign objects and remove them. If the load is imbalanced, redistribute the clothes inside the drum.
When to Call an Expert: Persistent noise, especially if it’s due to worn drum bearings, should be addressed by a professional technician to prevent further damage.
If your washer won’t start, it could be due to several reasons:
Power Issues: Check if the washer is properly plugged in and that the outlet is functioning.
Defective Door or Lid Switch: The washer won’t start if the door or lid switch is faulty, as it’s a safety feature.
Blown Fuse or Tripped Circuit Breaker: A blown fuse or tripped breaker can prevent the washer from starting.
DIY Tip: Make sure the washer is plugged in and check the circuit breaker. Check if the outlet works by plugging in a different device.
When to Call an Expert: If the washer still doesn’t start, a professional can diagnose issues with the internal components like the door switch or control board.
Water leaks are one of the most common washing machine problems. Below are the three most frequent causes:
Damaged Door Seal: The door seal can wear out over time, leading to leaks during the wash cycle.
Loose or Damaged Hoses: The water inlet or drain hoses might be loose or damaged, causing leaks.
Overloading: Overloading the washer can cause water to spill out during the cycle.
DIY Tip: Inspect the door seal and hoses for any signs of damage. Tighten any loose connections.
When to Call an Expert: Persistent leaks that aren’t resolved by these fixes should be looked at by a professional technician to avoid water damage.
A washer that doesn’t fill with water won’t be able to clean your clothes. Below are the three most frequent causes:
Clogged Water Inlet Valve: The water inlet valve controls the flow of water into the washer. If it’s clogged, the washer won’t fill.
Faulty Water Level Sensor: This sensor tells the machine when it has enough water. If it’s faulty, the washer might not fill.
Low Water Pressure: If your home’s water pressure is too low, the washer may not fill correctly.
DIY Tip: Check the water inlet valve for clogs and ensure that your home’s water pressure is adequate.
When to Call an Expert: If these steps don’t fix the problem, it’s best to contact a repair technician to check the water level sensor and other components.
Excessive vibration can cause harm to your washing machine. Below are the three most frequent causes:
Unbalanced Load: An uneven load can cause the washer to vibrate excessively during the spin cycle.
Worn Shock Absorbers: The shock absorbers help stabilize the drum during the spin cycle. If they’re worn, the machine may vibrate.
Improper Leveling: If the washing machine is not level, it will vibrate more than usual.
DIY Tip: Make sure the washer is level and adjust the feet if necessary. Additionally, avoid overloading the washer and make sure to balance the load.
When to Call an Expert: If leveling and load adjustments don’t solve the problem, a technician can inspect the shock absorbers and other components.
Regular maintenance of your washing machine is crucial to keep it running smoothly and to prevent these common problems. Here’s what you should do:
If you find yourself in need of professional help to repair your washing machine, Appliance GrandMasters is the answer. We provide comprehensive appliance repair and maintenance solutions in Greenville, South Carolina. Our proficient technicians are capable of diagnosing and rectifying any issues, thereby guaranteeing the optimal functioning of your washing machine.
Don’t delay and call right Appliance GrandMasters fight now for all your appliance repair and maintenance needs. We are proud to support homeowners in Greenville, SC, and the surrounding areas.
Get professional home appliance Repairs, maintenance & Installation now!
Formerly known as Mr. Rogers Appliances, we rebranded our appliance repair company to Appliance GrandMasters in June 2020. Since then, we have focused on developing our brand to be customer-oriented.
Fixing appliances has become a passion for us. We enjoy challenges and we are always studying to become the very best.
We accomplish swift and top-notch service by employing efficient and friendly customer service procedures that guarantee accurate answers and solutions.
Our approach involves the careful selection and comprehensive training for the necessary skills to fulfill our customers’ needs. Through these strategies, we strive to consistently provide exceptional service.